Page one Before You Start First Things First Cleaning the Fuel Tank Cleaning the Carburetor Cleaning Fuel Shutoff Valve Cleaning Air filter Cleaning Oil Strainer De-Carbonize Spark Plug Torque specs Speed Modifcations Adjusting throttle cable Idle/Air Screw adjustments Add a Kickstart '84 & '85 Too Much or Too Little Gas Compression Tires Drivetrain Get Parts General Intake FAQ Determining year

Remove both rear frame covers. Disconnect the oil inlet line at the oil pump and allow the oil to drain into a clean container. Loosen the tube clip and disconnect the oil tube joint under the oil tank. Remove the oil strainer. Clean the oil strainer with compressed air. Installation of the oil strainer is the reverse of removal. Fill oil tank with the recommended oil up to the proper level. Bleed air from the oil pump and oil line.

All information was collected from
http://freshlinks.net/aspforum/display_forum.asp?fid=179
Thanks everyone who contributed!